« BACK  

QuickPurge® high speed pipe purging system

The QuickPurge® high speed pipe purging system range
The QuickPurge® high speed pipe purging system range

Time is money! Waiting for pipe joints to be purged ready for welding can take anything up to four hours, depending on the diameter of the pipe being welding and the method chosen for purging.

QuickPurge® III cuts these waiting times so dramatically that they amortise themselves in less than one weld.

A 36" diameter stainless steel pipe for example can be purged down to 100 parts per million (ppm) of oxygen in under 32 minutes. Compare this with purging using foam dams that will outgas heavily into the weld zone and will take hours, not a few minutes.

High speed pipe purging system QuickPurge® is leading the way in the field of purging tube, pipe and pipeline joints over 6" diameter, where oxygen levels are required to be as low as 10 (ppm) or less.

Huntingdon Fusion Techniques, HFT®'s innovative design of the QuickPurge® System means that zero colour welds will be achieved and there will be no loss of corrosion resistance caused by oxidation.

Using IntaCal® combined with the integrated PurgeGate® device makes it possible to safely inflate the dams with argon gas, prior to releasing it, for purging the space between the dams where the weld joint is located. It is almost impossible for the inflatable dams to burst as a result of undue pressure increase or accidental flow increase of the inflation and purging gas.

All systems are manufactured as standard with a hose for connecting a Weld Purge Monitor® to, which can read oxygen levels down to 10 ppm.

Materials chosen for QuickPurge® are such that they are resistant to the higher weld heat present and at the same time exhibiting lower outgassing rates to prevent weld contamination. For heat-treated chrome steel pipe joints, HFT® manufactures the special HotPurge™ range for the higher and longer temperature exposure requirements.

QuickPurge® Systems are manufactured for pipe diameters from 6 to 96 inches (150 to 2440 mm) and are equipped with a "QuickFit" coupling for the purge / inflation hose.

The "QuickFit" coupling is fitted with 'O' ring for gas tight sealing and stainless steel collet to hold the tube mechanically tight. The coupling is fitted with an anti-release circlip to prevent parts accidentally separating inside the pipe.

The sleeve between the dams on the QuickPurge® Systems reduces the volume to be purged by two thirds, ensuring a really fast purge time down to 10 ppm. Sleeve lengths for each size have been carefully calculated so that the QuickPurge® Systems can be pulled around 90° elbows for the purging of connecting joints.

QuickPurge® Systems are available for each American Pipe Institute (API) pipe diameter, with an expansion range to cover all internal diameters from schedule 10 to schedule 160 and even thicker pipe wall standards.

Return on Investment (ROI) charts are available, to show that the payback for each size will normally be between 1 and 2 welds, giving companies the opportunity to make very significant savings on larger contracts.

On large contracts, HFT® will gladly send technicians for installation, to help in the instruction of welders to show how the system works and to explain the methods of use etc. prior to supervising start up.

All HFT® products are covered by the normal 12 months warranty plus an instant, no quibble, replacement guarantee in the event of faults that may occur.

PUBLISHED: 23 Jun 15 Bookmark and Share
Company:
Huntingdon Fusion Techniques Limited
Visit Huntingdon Fusion Techniques Limiteds website
Country:
UK
Tel:
+44 1554 836 836
Fax:
+44 1554 836 837
Email:
marketing@huntingdonfusion.com
Website:
www.huntingdonfusion.com
Other News from Huntingdon Fusion Techniques Limited:

»
Dramatically reduce Weld Purging times with QuickPurge®
»
Switch to MultiStrike® for an improved Tungsten Electrode performance
»
Flexible Welding Enclosures® for zero colour titanium welds
»
Weld purge your pipes the 'Elite' way
»
Monitor your Weld Purge at a low cost
»
Weld Backing Tape™ for weld purging
»
Weld purging company provides first class service
»
No disruption to pipe repair with Accu-Freeze™
»
Nylon Plugs for maintenance work
»
Pipes welded faster
»
Significant increase to your Weld Purge Monitor's sensor life
»
Major petrochemical company uses Flexible Welding Enclosure®
»
Smallest ever Weld Trailing Shield®
»
When the temperature rises, protect your Weld Purging System with new Heat Resistant Covers
»
We have the key to your perfect weld purge
»
PurgExtra® tube and pipe purging system
»
Keep a distant 'Eye' on your Purge
»
Ensure your Weld Purging System doesn't burst
»
Block pipes instantly and effectively with Pipestoppers®
»
Welding World Award Winner
»
Fast purging of heat-treated pipework
»
For your PurgEyes® only
»
Purge your tube and pipes the Elite way
»
Flexible Welding Enclosures®, ultra low cost welding chambers
»
Use Backing Tape™ for perfect weld underbeads
»
Bright, oxide free welds with Trailing Shields®
»
Nylon Weld Purge Plugs for weld Purging
»
Keep an Eye on your Weld Purge
»
The use of water soluble Weld Purge Film™ for pipe purging
»
Freeze sealing for pipe repairs with Qwik-Freezer™
»
Argon Hose for your Weld Purging System
»
Do not put your welds at risk
»
Out with the old and in with the new
»
Inflatable Stoppers come in many shapes, sizes and material
»
QuickPurge® your pipes for perfect welds
»
Keep your Eye on the Purge
»
Freeze sealing for pipe repairs with Accu-Freeze®
»
Flexible Welding Enclosures® - ideal for the welding of titanium and zirconium
»
Bright, clean, high quality welds with Trailing Shields®
»
PurgExtra™ tube and pipe purging system
»
Keep a distant 'Eye' on your Purge
»
Freeze sealing for pipe repairs with Qwik-Freezer®
»
Mechanical pipe sealing plugs
»
PurgElite® inflatable tube and pipe weld purging system
»
We have the key to your perfect weld
»
The use of Weld Purge Film® for Pipe Purging
»
MultiStrike® Tungsten Electrodes offer safer, cheaper TIG welding
»
Ensure your Weld Purging System doesn't overinflate by using a PurgeGate® Valve
»
Inflatable Pipestoppers, where access to the job site is difficult
»
Weld Purging provides the cleanest, highest quality and lowest cost welds ever!
»
QuickPurge® high speed pipe purging system
»
Weld Purge Dams
»
Flexible enclosure welding
»
PurgExtra™ pipe weld purging system
»
HFT white paper: Remote Weld Purge Monitoring
»
Upgraded high speed pipe purging system
»
Pipe sealing plugs and stoppers
»
Low cost pipe weld purging system (for purging hot sections)
»
Keeping it clean with Argweld® Flexible Weld Purging Enclosures®
»
Largest inflatable Pipe Welding Purge System ever
»
Weld Purge Monitor® Family gets new addition
»
HotPurge™ pipe purging systems for pre-heated pipe welding
»
Return on Investment QuickPurge®II
»
QuickPurge® II
»
Launch of Argweld Pipe Weld Purging Systems® for tube, pipe and pipeline industries
»
Weld Purge Monitor improved to read down to 1 part per million
»
Fabtech/AWS annual exhibition was a great success for Huntingdon Fusion Techniques this year
»
Financial Director appointed at HFT
»
New style 'Weld Purge Monitor'™
»
The PurgEye® 300 Nano Weld Purge Monitor™
»
Complete family of 'Weld Purge Monitors™'
»
Orbital welding purge plug kits
»
Grapes or Sugaring? Pipe Weld Root defects can be a thing of the past
»
New white paper published - "Why Post Weld Purging is necessary"
»
New white paper published - "Why use a Weld Purge Monitor"
»
Launch of new Tube and Pipe weld purge systems™
»
PurgEye® 100 Weld Purge Monitor - comprehensive version
»
Weld purging systems


Industry News:
Flower design in COPRA® RF
data M at EuroBLECH in Hanover
data M Sheet Metal Solutions GmbH, Germany
Whatever the size of pipe, QuickPurge®  Systems reduce waiting times so dramatically that they pay for themselves in less than one weld
Dramatically reduce Weld Purging times with QuickPurge®
Huntingdon Fusion Techniques Limited, UK
The Kinkelder Saw blade app has been specifically designed to provide cutting specialists with a wide range of free information on specific cutting applications and the use of Kinkelder saw blades
Kinkelder introduces dedicated free app for cutting professionals
Kinkelder B.V., Netherlands
During the World Nuclear Exhibition Fine Tubes and Superior Tube held significant discussions with such major European nuclear industry players as EDF, Areva and British Energy as well as representatives from China's fast-developing nuclear industry
Fine Tubes and Superior Tube see growing demand from the global nuclear industry
Fine Tubes Limited, UK
MultiStrike® Tungsten Electrodes contain a mix of non-radioactive rare earth elements, which dramatically lower the working temperature of the tungsten electrode, making it longer lasting
Switch to MultiStrike® for an improved Tungsten Electrode performance
Huntingdon Fusion Techniques Limited, UK
Flexible Welding Enclosure® for zero colour titanium welds
Flexible Welding Enclosures® for zero colour titanium welds
Huntingdon Fusion Techniques Limited, UK
AM Industrial finishes up another runoff - 2.5
3" Eagle CNC tube bender
AM Industrial Group, LLC, USA
PurgElite® - a range of low cost Tube and Pipe Purging Systems that achieve a clean, oxide free, zero colour weld
Weld purge your pipes the 'Elite' way
Huntingdon Fusion Techniques Limited, UK
The new website will enable customers to more easily access the full range of services, ensuring that Artel Rubber continues to be a market leader in meeting all of their customers ever growing requirements
Artel Rubber Company are pleased to announce the launch of their new website
Artel Rubber Company, UK
A leading coil processing equipment manufacturer has introduced variable speed drives from Control Techniques, an Emerson business
Unidrive M variable speed drives eliminate reliability issues and increases speed production by 300%
Control Techniques Ltd (Emerson), UK
» VIEW ALL NEWS «